Posts Tagged hub height

About 3x as Much Wind Power Available at 80m than at 50m hub heights

A new National Renewable Energy Laboratory (NREL) study, taller wind turbines can produce more power.

This is no surprise to anyone. Trees and other objects on the ground slow the wind, and as you get higher, you enter the region of smooth laminar flow where more energy is available. Laminar flow starts at about 50m.

A wind turbine with a hub height of 50m will have half its swept area above 50m. A wind turbine with 50m blades and a hub height of 80m. See my drawing:

What is interesting is that we may need to revise all our assumptions about how much wind is available for electric power. In Colorado, NREL found 3x as much wind potential at 80m than a previous Colorado study using the 50m hub height assumption. After all, not only is there more swept in the laminar flow, but there are more areas where tall wind turbines would have the 30% minimum capacity factor NREL assumes is enough to make them economic.

Here’s a graph showing the increase in capacity factors going from 80m to 100m hub height.

Comments (2)